[Pheonix]

Originally Posted by inTgr8r

They are an easy DIY.
There are places that loan out compression tools
Bill's web page gives lots of DIY info for COs, but the basics apply.
http://www.billswebspace.com/BMWZ4MK...llationDIY.htm

I helped to swap out the springs on a Z4MC! It was super easy and we finished in a few hours. Bill's DYI was very helpfull; however, you don't have to remove the trunk's carpet if you are only do the springs (for the Rears). I have a set of Eibach but is will wait until the OEM struts worn out and replace them all together. Good luck