Quote:
Originally Posted by Daniel7
Hey,
just for your information. I've done the microcontroller stuff.
It's based on an arduino. I cut the wire of the DSC push button and used one end as an input and the other end as an output to send signals to the DSC ecu.
Now if i push the button it sets to the next mode: DSC everything on -> DTC mode -> everything off -> DSC everything on. Every mode change with a short button push. Never pressing the button for 3 seconds again. 
Second new behaviour is that it remembers the current mode. On the next engine start it sets the mode to the mode that was active at the last run.
Bye,
Daniel |
Great job Daniel, I'm sure there will be a few people interested in this mod.
Quote:
Originally Posted by Dalecan
Can someone translate that into English! Lol
|
Simply put, the OP didn't like the 3 second holding of the DSC button, so instead, they changed it to a short press for any mode. As well the car now remembers the last mode selected the next time the car is started were as before, the car defaulted back to all nannies on when turned off. Brilliant!