Quote:
Originally Posted by bten
Did you drill the hole in place? What size/type bit?
Thanks,
|
Yes. It's a 7/8" hole.. I used a step drill bit... I first determined the center and the drilled a small hole (1/4"}. The I used the step drill bit to finish it out. A step drill bit looks like a cone. It makes a hole progressively bigger... Or you can remove the center console and drill it that way... That would be the wise thing to do.... BUT I elected to do while it was still in position... I just had to make sure I didn't drill through the two cable under there... You just need to take your time... Chuck I