Quote:
Originally Posted by Kgolf31
I hate to keep on derailing from your thread (my apologies)
|
No problem. I posted in the "wheels" section rather than photos section because I thought there might be some technical discussion around fitment. Keep "derailing" as needed!
Quote:
Originally Posted by Kgolf31
I completely agree with the 9.5" wheel. I completely forgot about the extra tread that is added with the increase wheel width. Even though I may screw myself over with a SCCA class (even though that may change with the letter I wrote) the car will be MUCH more fun to drive on the track and auto-x with a square set-up and massive camber
|
Are you appealing the class for the Z4M? I may run a 255/35 265/35 set up at some point.
Quote:
Originally Posted by Kgolf31
I was thinking ET 35 upfront and ET 22 in the rear. Should be enough with extra camber (i'm hopping I don't have to go adjustable control arms in the rear).
Does anyone know if 17" Wheels will fit? The only problem is that I'll be forced to run staggered
|
Yes, they will fit. There's a 17 x 9.5 ET35, and a 17 x 10 ET25.
Colakitty is running 17s (but 10.5 rear). I wonder if there are any concerns with the larger sidewall, flex, and tire movement? Sidewall design, and rim width would help manage this though.
Quote:
Originally Posted by Kgolf31
Lots of good information here. I run 265 RS3s in the rear with stock OEM wheels and I rub on the inner plastic wall. I had to add a 5mm spacer (running -1.5* camber)
|
Thanks. Yes, lots of variables. But worth thinking through, along with objectives and needs, to get the best fit and performance.