Originally Posted by paintpro21
The 18x9.5" et35 wheel has a 1mm clearance issue with a stoptech 355mm kit. A 3mm spacer solves this. BUT if you were to run a meaty 265 in an extreme summer tire or even more importantly an r-compound, you would most likely need a spacer for strut tube clearance anyway. So you'd be killing to birds with one stone. With a small spacer basically anything fits except for a brembo 380mm kit.
wheels are dirty. I believe this setup has a 5mm front spacer. maybe none, I'll confirm with the owner.
Yes, it is a 5mm spacer, could probably get away with a 3mm. Keep in mind I was running the TCK D/A at the time, no idea how the clearance will be with stock suspension.