|
JRA.. Don't give up...
Hey... I was just looking... There are a couple of ways to check to see if you have the cable for the sport button... 1) Check to see if you have the IVM module (see Ron's #42 post). If you do, then open it up and check pin 20 of connector X60191. If it has a Blk/Red/yellow wire on it, then that cable is buried in there some place.... 2)If you don't have the IVM module, open the cover over your DME and check connector X60004 pin 1 for a Blk/Red/Yellow wire (see Ron's #50 post). Again, if that wire is there, the cable is buried in there someplace... Hope this helps... Chuck I
|