View Single Post
      09-23-2012, 09:03 AM   #30
Jstic
Private First Class
1
Rep
119
Posts

 
Drives: 06 Z4 3.0i
Join Date: Aug 2012
Location: CT

iTrader: (0)

That's it, two screws. Take them out and lower the cover, but don't pull it out yet. You have to disconnect a control box that is attached to the backside of that cover to be able to remove the cover. Just loosen one of the two nuts holding down the control box, take the other one out and you can slide the control box out. Once the cover is gone if you look up you will see the actuator and the 4 wire connector. The connector wires are green, blue, gray and white.